MAINTENANCE  

Sandblasted glass coated with Pro-Guard can be cleaned with a mild glass cleaner and a soft cotton rag do not use harsh scrubbing when cleaning.  For best results coated glass should not be washed before five (5) days of application,to allow proper curing time. If marks are left during installation, they can be removed with a mild glass cleaner only when recommended curing time has passed. When handling the coated glass, wearing clean glass gloves is recommended.  

WARRANTY  

G.M.D. Industries warrants the effectiveness of its sealer Pro-Guard for a period of (5) years provided that the sandblasted material is handled according to maintenance procedures detailed above. In case that defects appear on the protected surface, G.M.D. Industries will evaluate the situation in question and consider the best possible solution to restore the surface to its previous finish.  Material must be inspected for defects prior to installation in order to minimize costs and further deterioration

In no event shall G.M.D. Industries be liable for any indirect, special, incidental, consequential or similar damages (including, but not limited to loss of profits or revenues, inability to use the product or other associated products, the cost of substitution or materials, removal or re installation of materials, and claims by third parties) resulting from the use of our sealer Pro-Guard

 

SEALER FOR SANDBLASTED SURFACES

• home
• about us
• headquarters
• architectural glass etching
• decorative carved glass
• carved stone
• UltraEtch
• UltraFine
• color glass
• ProGuard sealer
• made in New York
• formats to send media
• representatives
• measurement conversion
• warranty

Price quoted is for work performed on regular time. All jobs requiring partial shipments will be accompanied by partial invoices. Artwork will be submitted upon request based on client's specifications. Additional artwork or modifications will incurr in additional charge of $100 per hour. G.M.D. Industries, Inc. is not responsible for damage, breakage or replacement of customer supplied material. G.M.D. Industries, Inc. is not responsible for damage caused to glass due to clean cut edges. However, precautions are taken to ensure proper handling of customer's material and prevent human error. Backpainted glass should be allowed proper time to dry. Non-acidic silicone MUST be used for installation. G.M.D. Industries, Inc. is not responsible for backpainted glass that has not been allowed to dry completely before pick up.